Free участник - Boegger Industrial Limited-filter element
| Данные компании | Описание компании | ||||||||||||||||||||
|
Boegger manufactures the following types of filter elements: Hydraulic, designed to equip pressurized filters, filter drain and other hydraulic systems. Oil intended for lubricating systems, filters, complete machines and mechanisms in various industries. Fuel intended for the complete fuel filters vehicle engines. Aircraft designed for air filter assembly vehicle engines and compressors. Filter elements are manufactured with a nominal fineness of filtration: Paper - 05, 10, 25 and 40 microns Net - 40, 80, 120 and 160 microns Filter elements provide the highest degree of filtration efficiency for industrial, mobile, and process applications. Our filter elements are composed of micro-glass media, the most recent innovation in high performance filtration technology. Micro-glass media is inert, inorganic, and far exceeds any paper or cellulose filter element performance. Water or chemicals, which cause softening, swelling, and degradation in conventional cellulose or pleated paper filters, do not affect micro-glass media. The advantages of making filter element Filter elements and filters manufactured have a high technical specification through a number of structural and technological features, chief among them the use of modern materials quality, reliability and stability of the design process. The use of modern filter materials Effective is the one filter element, which not only removes dirt but also keeps them securely for the duration of the service. Depending on the material, the filter elements are divided into two main groups: surface and volume. Using of filter material has been a very stable structure. Enhanced binding of the fibers provides a stable bond between the fibers and increases the strength of the material under the influence of load versus load fluctuations of pressure and flow rate, temperature and aging. With this filter elements maintain its high performance during its entire life. The filter material is the most important component of the "filter" system with respect to prolonged life and wear protection of the system. Decisive criteria for the selection are the necessary degree of cleanliness of the operating medium, the initial pressure differential and the contamination retention capacity. Mount Fixing filtering curtains, adhesives and potting applied mass is crucial for the efficiency of the filter element. Through the use of supporting curtains made of nets in combination with one or more filtering curtains, achieved the desired filtration factor, which ensures effective protection of the host machine and increases the life of filter elements. Stiffness of the frame filter element is provided, where necessary, special reinforcing ring rolling or circular edges. The stability of the process The optimal form of corrugated filter media is possible only with a stable automated manufacturing process and strict compliance with technological standards. In the manufactured quality filter element secured the required number of corrugations, which allows to obtain the optimum filter area and the best performance. |
=
Продукты компании
 |
Wedge Wire Filter Elements
Колючая проволока
Here show wedge wire filter element specification:
Flow Direction: in to out.
Degree of Filtration
(Slot Opening): 0.8 mm OR 1 mm.
Materials: SS 316L.
Service: Industrial Water.
|
 |
Sintered Filter Elements
Колючая проволока
Sintered filter elements are made out of five layer sintered metal mesh.
Material: 316 SS.
Pore Size: 5 Micron Nominal.
Filter Material: Sus 304.
Fluid: Natural Gas.
Temp: 70-80 ° C.
Results Current Filter: 20 Micron Filter.
Results Expected: 5 Micron.
|
 |
Stainless Steel Filter Element
Колючая проволока
Stainless steel filter elements are made up of several layers of 316 mesh that are sintered together to form an integrated porous element. The middle mesh is of very fine gauge and determines the filtration efficiency of the elements. This layer is then ov
|
 |
Pleated Filter Element
Колючая проволока
Flow-Max filter cartridges outperform wound, spun, melt blown, resin bonded and other "depth" type filter elements because our cartridges are pleated to provide increased surface area and longer life.
Flow-Max filter cartridges outperform other pleated el
|
 |
Liquid Filter Element
Колючая проволока
Liquid filtration is the removal of solids from liquids by flowing the contaminated liquid through a filter medium that will retain the solid particulates and allow only clean liquid to pass through. A liquid filter is designed to remove impurities that oc
|
 |
Wire Mesh Strainers
Колючая проволока
We supply Stainless Steel Wire Mesh Strainers fabricated from woven wire cloth, mainly tea strainers and sink strainers, for kitchen and family uses.
The stainless steel material applies: AISI316 and AISI316L.
Shapes and sizes: Tailored to meet your requ
|
 |
Nozzles Strainers for Sand Filters
Колючая проволока
Nozzles strainers for sand filters
Material of construction:
316 or 316-L stainless steel.?” BSP thread.
Slot opening: 250 micro ( 0,25 mm ).
Wedge wire type.
Flow direction: outside/in.
Size: Approx. model K-1.
Nozzles strainers for sand filters
Materi
|
 |
Candle Filter
Колючая проволока
Candle Filters for polymer melt can be pleated in the body with several end types. Made of woven filter wire mesh cloth or sintered fiber web imported, candle filter elements offer ideal property for polymer melting processing in chemical and fiber industr
|
 |
Filter Media
Колючая проволока
We normally use stainless steel woven mesh 304, 304L, 316, 316L as filter media in the patterns of Plain, Twilled, Dutch weave to achieve full range of aperture and properties.
In Plain Weave Filter Wire Cloth: The warp wire that establishes the length of
|
|
|
Gas Filter Element
Колючая проволока
The most versatile filter, our stainless steel filter element is suitable for use in filtering steam, gases and liquids. The element body is a weldless tube of sintered stainless steel between stainless steel end caps. Particle retention rates of 1, 5 and
|