Send Message

Descrition: 12VDC5A9P:1 in 9 Out CCTV Camera Power Supply Box (9 channels) The CCTV power supply is primarily designed for WUF-GV, PTZ and camera of CCTV system. It’s also used for access, building/house control; intrude alarm and other light-current. It i

Description: The crimping tool (crimper) T5009 is for crimping connectors such as F, N, BNC.TNC, UHF, ST, SC, SMA, etc. Specifications of 5 holes: 6.5mm, 5.41mm, 2.54mm, 1.72mm, 8.22mm For crimping RG type cable: RG55, 58, 59, 62, 5, 6, 21,141,142, 143,

Descrition: The CCTV power supply is primarily designed for WUF-GV, PTZ and camera of CCTV system. It’s also used for access, building/house control, intrude alarm and other light-current device. Technical specifications: Model S1230D Power 36W Dimension

Crimp on Male CCTV BNC Connector for Coaxial Cable (CT5045) Description: BNC Connector: BNC Male Crimp on Connector, 3 pieces Two-step ferrule with strain relief crimp Material: Body-zinc alloy, nickel plated Ring-copper, nickel plated Center pin-copper,

Description: Power-Video-Audio/Data signals are routed via UTP and RJ45.The unit is a passive (non-amplified) device that allows the transmission of real-time monochrome or color video over Unshielded Twisted-Pair (UTP) telephone wire.

Description: The Tool-less Passive CCTV UTP Video Balun VB108E is a passive transmission device that transmit video signal over unshielded twisted pair wires, point-to-point, for distances up to 1000 feet (330 m). It uses Category 5 UTP. It’s easy to inst

Description: PAL/NTSC Auto Adapt for Analogue Cameras and AHD Cameras Support AHD 1080P/960P/720P and CVBS cameras Support 1ch Audio Test Support UTP cable test 5VDC output for mobile phone 12VDC output for CCTV Camera MINI USB Universal Charging Port Low

Description: Male DC plug with terminal screw 2.1mm male Power Plug with Built-in Screw This CCTV camera power connector is from one power connector end DC jack male to another end terminal for CCTV camera connection. Net Weight: 6g/piece

POE1602SFP-3 is applied to POE IPC camera, POE WIFI AP, and POE IPPHONE, and easy for network transmission. This device comes with SFP port, easy for optical fiber remote transmission. Main Features 16GE POE+2SFP, with different modules, can up to 100KM.

Description: SW16G is applied to IPC camera, Wireless AP, and IP Phone, and easy for network transmission. Features: 16GE, 500M CPU, 52G bus. Comply to IEEE 802.3, IEEE 802.3u, IEEE 802.3ab. Fluid Control: Full-duplex: IEEE 802.3x, Half-duplex: back pres